Journal of Biomechanics
Volume 38, Issue 5 , Pages 1143-1154 , May 2005

Stair climbing is more critical than walking in pre-clinical assessment of primary stability in cementless THA in vitro

,Accepted 12 May 2004.

References 

  1. Baleani M, Cristofolini L, Toni A. Initial stability of a new hybrid fixation hip stem (Experimental measurement of implant-bone micromotion under torsional load in comparison with cemented and cementless stems). Journal of Biomedical Materials Research. 2000;50:605–615
  2. Bergmann G, Graichen F, Rohlmann A. Is staircase walking a risk for the fixation of hip implants?. Journal of Biomechanics. 1995;28:535–553
  3. Bergmann G, Deuretzbacher G, Heller M, Graichen F, Rohlmann A, Strauss J, et al. Hip contact forces and gait patterns from routine activities. Journal of Biomechanics. 2001;34:859–871
  4. Bergmann, G., Heller, M., Duda, G.N., 2001b. In: Bergmann, G. (Ed.), Preclinical testing of cemented hip replacement implants: Pre-normative research for european standard, Contract SMT4-CT96-2076, Workpackage 5: Development of the loading configuration, final report. Hip98, Free University of Berlin (ISBN 3-9807848-0-0).
  5. Berzins A, Sumner DR, Andriacchi TP, Galante JO. Stem curvature and load angle influence the initial relative bone-implant motion of cementless femoral stems (published erratum appears in Journal of Orthopaedic Research 1995; 13(1):151). Journal of Orthopaedic Research. 1993;11:758–769
  6. Bühler DW, Berlemann U, Lippuner K, Jaeger P, Nolte LP. Three-dimensional primary stability of cementless femoral stems. Clinical Biomechanics (Bristol, Avon). 1997;12:75–86
  7. Burke DW, DO OC, Zalenski EB, Jasty M, Harris WH. Micromotion of cemented and uncemented femoral components. Journal of Bone and Joint Surgery—British Volume. 1991;73:33–37
  8. Callaghan JJ, Fulghum CS, Glisson RR, Stranne SK. The effect of femoral stem geometry on interface motion in uncemented porous-coated total hip prostheses. Comparison of straight-stem and curved-stem designs.. Journal of Bone and Joint Surgery—American Volume. 1992;74:839–848
  9. Cameron HU, Pilliar RM, MacNab I. The effect of movement on the bonding of porous metal to bone. Journal of Biomedical Materials Research. 1973;7:301–311
  10. Cristofolini L, Viceconti M, Toni A, Giunti A. Influence of thigh muscles on the axial strains in a proximal femur during early stance in gait. Journal of Biomechanics. 1995;28:617–624
  11. Cristofolini L, Viceconti M, Cappello A, Toni A. Mechanical validation of whole bone composite femur models. Journal of Biomechanics. 1996;29:525–535
  12. Donnelly WJ, Kobayashi A, Freeman MA, Chin TW, Yeo H, West M, et al. Radiological and survival comparison of four methods of fixation of a proximal femoral stem. Journal of Bone and Joint Surgery—British Volume. 1997;79:351–360
  13. Ducheyne P, De Meester P, Aernoudt E. Influence of a functional dynamic loading on bone ingrowth into surface pores of orthopedic implants. Journal of Biomedical Materials Research. 1977;11:811–838
  14. Duda GN, Heller MO, Albinger J, Schulz O, Schneider E, Claes L. Influence of muscle forces on femoral strain distribution. Journal of Biomechanics. 1998;31:841–846
  15. Engh, C., O’Connor, D, Jasty, M., McGovern, T., Bobyn, J., Harris, W., 1992. Quantification of implant micromotion, strain shielding, and bone resorption with porous-coated anatomic medullary locking femoral prostheses. Clinical Orthopaedics 13–29.
  16. Freeman MA, Plante-Bordeneuve P. Early migration and late aseptic failure of proximal femoral prostheses (published erratum appears in Journal of Bone and Joint Surgery —British Volume 1994;76(6) (999)). Journal of Bone and Joint Surgery—British Volume. 1994;76:432–438
  17. Gebauer D, Refior H, Haake M. Micromotions in the primary fixation of cementless femoral stem prostheses. Archives of Orthopaedic and Trauma Surgery. 1989;108:300–307
  18. Gotze C, Steens W, Vieth V, Poremba C, Claes L, Steinbeck J. Primary stability in cementless femoral stems (custom-made versus conventional femoral prosthesis). Clinical Biomechanics (Bristol, Avon). 2002;17:267–273
  19. Gustilo, R.B., Bechtold, J.E., Giacchetto, J., Kyle, R.F., 1989. Rationale, experience, and results of long-stem femoral prosthesis. Clinical Orthopaedics 159–168.
  20. Haddad R, Cook SD, Thomas KA. Biological fixation of porous-coated implants. Journal of Bone and Joint Surgery—American Volume. 1987;69:1459–1466
  21. Harman MK, Toni A, Cristofolini L, Viceconti M. Initial stability of uncemented hip stems (An in vitro protocol to measure torsional interface motion). Medical Engineering and Physics. 1995;17:163–171
  22. Harris, W.H., Mulroy Jr., R.D., Maloney, W.J., Burke, D.W., Chandler, H.P., Zalenski, E.B., 1991. Intraoperative measurement of rotational stability of femoral components of total hip arthroplasty. Clinical Orthopaedics 119–26.
  23. Heller MO, Bergmann G, Deuretzbacher G, Durselen L, Pohl M, Claes L, et al. Musculo-skeletal loading conditions at the hip during walking and stair climbing. Journal of Biomechanics. 2001;34:883–893
  24. Kim, Y.H., Kim, V.E., 1993. Early migration of uncemented porous coated anatomic femoral component related to aseptic loosening. Clinical Orthopaedics 146–155.
  25. Kobayashi A, Donnelly WJ, Scott G, Freeman MA. Early radiological observations may predict the long-term survival of femoral hip prostheses. Journal of Bone and Joint Surgery—British Volume. 1997;79:583–589
  26. Krismer M, Biedermann R, Stockl B, Fischer M, Bauer R, Haid C. The prediction of failure of the stem in THR by measurement of early migration using EBRA-FCA. Einzel-Bild-Roentgen-Analyse-femoral component analysis. Journal of Bone and Joint Surgery—British Volume. 1999;81:273–280
  27. Lu TW, Taylor SJ, O’Connor JJ, Walker PS. Influence of muscle activity on the forces in the femur (An in vivo study). Journal of Biomechanics. 1997;30:1101–1106
  28. Maher SA, Prendergast PJ. Discriminating the loosening behaviour of cemented hip prostheses using measurements of migration and inducible displacement. Journal of Biomechanics. 2002;35:257–265
  29. Malchau H, Herberts P, Ahnfelt L. Prognosis of total hip replacement in Sweden. Follow-up of 92,675 operations performed 1978–1990. Acta Orthopaedics Scandinavica. 1993;64:497–506
  30. Maloney, W.J., Jasty, M., Burke, D.W., O’Connor, D.O., Zalenski, E.B., Bragdon, C., Harris, W.H., 1989. Biomechanical and histologic investigation of cemented total hip arthroplasties. A study of autopsy-retrieved femurs after in vivo cycling. Clinical Orthopaedics 129–140.
  31. McKellop H, Ebramzadeh E, Niederer PG, Sarmiento A. Comparison of the stability of press-fit hip prosthesis femoral stems using a synthetic model femur. Journal of Orthopaedics Research. 1991;9:297–305
  32. Mjoberg B. Fixation and loosening of hip prostheses. A review [see comments]. Acta Orthopaedics Scandinavica. 1991;62:500–508
  33. Monti L, Cristofolini L, Viceconti M. Methods for quantitative analysis of the primary stability in uncemented hip prostheses. Artificial Organs. 1999;23:851–859
  34. Morlock M, Schneider E, Bluhm A, Vollmer M, Bergmann G, Mueller V, et al. Duration and frequency of every day activities in total hip patients. Journal of Biomechanics. 2001;34:873–881
  35. Morscher E. Experiences, requirements and development of cement-free hip endoprostheses. Orthopade. 1987;16:185–196
  36. Nistor, L., Blaha, J.D., Kjellstrom, U., Selvik, G., 1991. In vivo measurements of relative motion between an uncemented femoral total hip component and the femur by roentgen stereophotogrammetric analysis. Clinical Orthopaedics 220–227.
  37. Nunn D, Freeman MA, Tanner KE, Bonfield W. Torsional stability of the femoral component of hip arthroplasty. Response to an anteriorly applied load. Journal of Bone and Joint Surgery—British Volume. 1989;71:452–455
  38. Phillips TW, Messieh SS, McDonald PD. Femoral stem fixation in hip replacement. A biomechanical comparison of cementless and cemented prostheses. Journal of Bone and Joint Surgergy—British Volume. 1990;72:431–434
  39. Phillips TW, Nguyen LT, Munro SD. Loosening of cementless femoral stems (A biomechanical analysis of immediate fixation with loading vertical, femur horizontal). Journal of Biomechanics. 1991;24:37–48
  40. Pilliar, R.M., Lee, J.M., Maniatopoulos, C., 1986. Observations on the effect of movement on bone ingrowth into porous-surfaced implants. Clinical Orthopaedics 108–113.
  41. Rohlmann A, Mossner U, Bergmann G, Hees G, Kolbel R. Stresses on the femur following hip joint replacement. Zeitschrift Orthopaedics. 1983;121:47–57
  42. Schneider, E., Kinast, C., Eulenberger, J., Wyder, D., Eskilsson, G., Perren, S.M., 1989. A comparative study of the initial stability of cementless hip prostheses. Clinical Orthopaedics 200–209.
  43. Schramm M, Keck F, Hohmann D, Pitto RP. Total hip arthroplasty using an uncemented femoral component with taper design (Outcome at 10-year follow-up). Archives of Orthopaedics and Trauma Surgery. 2000;120:407–412
  44. Siebold R, Scheller G, Schreiner U, Jani L. Long-term results with the cement-free Spotorno CLS shaft. Orthopade. 2001;30:317–322
  45. Simoes JA, Vaz MA, Blatcher S, Taylor M. Influence of head constraint and muscle forces on the strain distribution within the intact femur. Medical Engineering & Physics. 2000;22:453–459
  46. Soballe K. Hydroxyapatite ceramic coating for bone implant fixation. Mechanical and histological studies in dogs. Acta Orthopaedics Scandinavian (Suppl). 1993;255:1–58
  47. Soballe K, Hansen ES, B-Rasmussen H, Jorgensen PH, Bunger C. Tissue ingrowth into titanium and hydroxyapatite-coated implants during stable and unstable mechanical conditions. Journal of Orthopaedics Research. 1992;10:285–299
  48. Spotorno L, Romagnoli S, Ivaldo N, Grappiolo G, Bibbiani E, Blaha DJ, et al. The CLS system. Theoretical concept and results. Acta Orthopaedics Belgica. 1993;59:144–148
  49. Stolk J, Verdonschot N, Huiskes R. Hip-joint and abductor-muscle forces adequately represent in vivo loading of a cemented total hip reconstruction. Journal of Biomechanics. 2001;34:917–926
  50. Sugiyama, H., Whiteside, L.A., Kaiser, A.D., 1989. Examination of rotational fixation of the femoral component in total hip arthroplasty. A mechanical study of micromovement and acoustic emission. Clinical Orthopaedics 122–128.
  51. Szivek JA, Benjamin JB, Anderson PL. An experimental method for the application of lateral muscle loading and its effect on femoral strain distributions. Medical Engineering & Physics. 2000;22:109–116
  52. Wroblewski BM. The mechanism of fracture of the femoral prosthesis in total hip replacement. International Orthopaedics. 1979;3:137–139

PII: S0021-9290(04)00261-1

doi: 10.1016/j.jbiomech.2004.05.023

Journal of Biomechanics
Volume 38, Issue 5 , Pages 1143-1154 , May 2005

Article Tools

* Image Usage & Resolution