« Previous
Next »
Journal of Biomechanics
Volume 41, Issue 9
, Pages 1897-1909
, 2008
Internal mechanical conditions in the soft tissues of a residual limb of a trans-tibial amputee
References
- . Pressure ulcers and deep tissue injury: a biomechanical perspective. Journal of Wound Care. 2007;16:336–342
- . Pressure-related deep tissue injury under intact skin and the current pressure ulcer staging systems. Advances in Skin and Wound Care. 2005;18:35–42
- . Shear vs pressure as causative factors in skin blood flow occlusion. Archives of Physical Medicine and Rehabilitation. 1979;60:309–314
- . Moving toward consensus on deep tissue injury and pressure ulcer staging. Advances in Skin and Wound Care. 2005;18:415–421
- . The etiology of pressure ulcers: skin deep or muscle bound?. Archives of Physical Medicine and Rehabilitation. 2003;84:616–619
- . Socket considerations for the patient with a transtibial amputation. Clinical Orthopaedics and Related Research. 1999;361:76–84
- . Risk factors for a pressure-related deep tissue injury: a theoretical model. Medical and Biological Engineering and Computing. 2007;45:563–573
- . The biomechanics of sitting-acquired pressure ulcers in patients with spinal cord injury or lesions. International Wound Journal. 2007;4:222–231
- . Bioengineering models of deep tissue injury. Advances in Skin and Wound Care. 2008;21:30–36
- . A numerical-experimental method to characterize the non-linear mechanical behaviour of human skin. Skin Research and Technology. 2003;9:274–283
- . Imaging of the painful lower limb stump. Radiographics. 2000;20:S219–S235
- . Strain energy functions of rubber I characterization of gum vulcanizates. Journal of Applied Polymer Science. 1975;19:2033–2058
- . Load transfer mechanics between trans-tibial prosthetic socket and residual limb—dynamic effects. Journal of Biomechanics. 2004;37:1371–1377
- . Survival rates in dysvascular lower limb amputees. International Journal of Surgery. 2006;4:217–221
- . In-vivo indentation of human skin. Journal of Biomechanical Engineering. 1990;112:63–69
- . An in-depth look at pressure sores using monolithic silicon pressure sensors. Plastic and Reconstructive Surgery. 1984;74:745–756
- . Finite element modeling of the contact interface between transtibial residual limb and prosthetic socket. Medical Engineering and Physics. 2004;26:655–662
- . The effects of pressure and shear on capillary closure in the microstructure of skeletal muscles. Annals of Biomedical Engineering. 2007;35:2095–2107
- . Pressure-time cell death threshold for albino rat skeletal muscles as related to pressure sore biomechanics. Journal of Biomechanics. 2006;39:2725–2732
- . Assessment of mechanical conditions in sub-dermal tissues during sitting: a combined experimental-MRI and finite element approach. Journal of Biomechanics. 2007;40:1443–1454
- . Skin disorders in amputees. Journal of American Academy of Dermatology. 2000;42:501–507
- . State-of-the-art research in lower-limb prosthetic biomechanics—socket interface: a review. Journal of Rehabilitation Research and Development. 2001;38:161–174
- . Stress relaxation of porcine gluteus muscle subjected to sudden transverse deformation as related to pressure sore modeling. Journal of Biomechanical Engineering. 2006;128:782–787
- . A three-dimensional finite element model of the transibial residual limb and prosthetic socket to predict skin temperatures. IEEE Transactions on Neural Systems and Rehabilitation Engineering. 2006;14:336–343
- . Real-time patient-specific finite element analysis of internal stresses in the soft tissues of a residual limb: a new tool for prosthetic fitting. Annals of Biomedical Engineering. 2007;35:120–135
- . Analysis of a below-knee patellar tendon-bearing prosthesis: a finite element study. Journal of Rehabilitation Research and Development. 1991;3:1–12
- . Two-dimensional elastic properties of human skin in terms of an incremental model at the in vivo configuration. Medical Engineering and Physics. 1995;17:304–313
- . Interface load analysis for computed-aided design of below-knee prosthetic sockets. Medical and Biological Engineering and Computing. 1992;30:419–426
- . Normal and shear stresses on a residual limb in a prosthetic socket during ambulation: comparison of finite element results with experimental measurements. Journal of Rehabilitation, Research and Development. 1993;30:191–204
- . Material properties of commonly-used interface materials and their static coefficients of friction with skin and socks. Journal of Rehabilitation Research and Development. 1998;35:161–176
- . Changes in interface pressures and shear stresses over time on trans-tibial amputee subjects ambulating with prosthetic limbs: comparison of diurnal and six-month differences. Journal of Biomechanics. 2005;38:1566–1573
- . Parametric analysis using the finite element method to investigate prosthetic interface stresses for persons with trans-tibia amputation. Journal of Rehabilitation Research and Development. 1996;33:227–238
- . Strain energy density as a rupture criterion for the kidney: impact tests on porcine organs, finite element simulation, and a baseline comparison between human and porcine tissues. Journal of Biomechanics. 2005;38:993–1001
- . Prediction of pressure in the below-knee socket interface by finite element analysis. ASME Symposium on the Biomechanics of Normal and Pathological Gait. 1987;39–44
- . A new MR-compatible loading device to study in vivo muscle damage development in rats due to compressive loading. Medical Engineering and Physics. 2006;28:331–338
- . Compression-induced deep tissue injury examined with magnetic resonance imaging and histology. Journal of Applied Physiology. 2006;100:1946–1954
- . Role of ischemia and deformation in the onset of compression-induced deep tissue injury: MRI-based studies in a rat model. Journal of Applied Physiology. 2007;102:2002–2011
- . Nonlinear viscoelastic material property estimation of lower extremity residual limb tissues. Journal of Biomechanical Engineering. 2004;126:289–300
- . Finite element estimates of interface stress in the trans-tibial prosthesis using gap elements are different from those using automated contact. Journal of Biomechanics. 2000;33:895–899
- . Comparison of computational analysis with clinical measurement of stresses on below-knee residual limb in a prosthetic socket. Medical Engineering and Physics. 2000;22:607–612
- . Development of a nonlinear finite element modeling of the below-knee prosthetic socket interface. Medical Engineering and Physics. 1995;17:559–566
- . Clinical investigation of the pressure and shear stress on the trans-tibial stump with a prosthesis. Medical Engineering and Physics. 1998;20:188–198
PII: S0021-9290(08)00165-6
doi: 10.1016/j.jbiomech.2008.03.035
© 2008 Elsevier Ltd. All rights reserved.
« Previous
Next »
Journal of Biomechanics
Volume 41, Issue 9
, Pages 1897-1909
, 2008
