Journal of Biomechanics
Volume 45, Issue 3 , Pages 569-578, 2 February 2012

Reverse engineering finger extensor apparatus morphology from measured coupled interphalangeal joint angle trajectories — a generic 2D kinematic model

  • J.N.A.L. Leijnse

      Affiliations

    • Department of Biomedical, Electro and Mechanical Systems (BEAMS), Ecole Polytechnique, Université Libre de Bruxelles, Belgium
    • Department of Orthopedic Surgery, Erasmus University Hospital, Université Libre de Bruxelles, Belgium
    • Biomechanics Research Laboratory, Department of Mechanical Engineering, Speed School of Engineering, University of Louisville, Louisville, Kentucky, USA
    • Corresponding Author InformationCorresponding author at: Department of Biomedical, Electro and Mechanical Systems (BEAMS), Ecole Polytechnique, Université Libre de Bruxelles, Av. F. Roosevelt 50, B-1050 Bruxelles, Belgium. Tel.:+32 2 650 31 61; fax:+32 2 650 24 82.
  • ,
  • C.W. Spoor

      Affiliations

    • Department of Neuroscience, Erasmus University Medical Center, Rotterdam, The Netherlands

Accepted 9 November 2011. published online 02 December 2011.

Abstract 

The interphalangeal (IP) finger joints coordinate as a mechanism when the deep flexor is active. This mechanism is created by the complex finger extensor apparatus (EA) – a confluence of end tendons of one or two extensors, radial and ulnar interossei, and lumbrical – which inserts as a single structure into both the middle and distal phalanges. Although the IP-coupling principle was well demonstrated more than half a century ago, the detailed relationship between EA morphology and IP coupling remains not well described. Main reasons are that by dissection the EA's fiber network loses functional consistency, while fibers becoming taut or slack beyond measuring resolutions complicate measuring functional fiber motions. To circumvent these difficulties, we present a two dimensional kinematic multi tendon-string EA model of fiber slackness and tautness through IP motion, including the retinacular and oblique retinacular EA ligaments. The model parameters were the strings' lengths and attachment points. The model's functional redundancies were resolved by individually interactively fitting model IP trajectories to previously measured IP trajectories of 68 fingers. All model trajectories accurately fitted their target IP trajectories for proximal interphalangeal (PIP) joint ranges smaller than 25° to 45°; about half accurately fitted over the entire IP range with the remaining half having maximum approximation errors between 3° to 12°, while all models again converged to target trajectories for full IP flexion. These accuracies suggest the model reflects real functional EA principles, with potential applications in biomechanical modeling, surgical reconstruction, rehabilitation, and prosthetic EA replacements.

Keywords: Hand, Finger, Kinematic model, Interphalangeal joints coordination, Extensor apparatus, Extensor mechanism, Extensor assembly, Retinacular ligament, Oblique retinacular ligament

To access this article, please choose from the options below

Login to an existing account or Register a new account.

  • Purchase this article for 31.50 USD (You must login/register to purchase this article)

    Online access for 24 hours. The PDF version can be downloaded as your permanent record.

  • Subscribe to this title

    Get unlimited online access to this article and all other articles in this title 24/7 for one year.

  • Claim access now

    For current subscribers with Society Membership or Account Number.

  • Visit SciVerse ScienceDirect to see if you have access via your institution.
 

PII: S0021-9290(11)00684-1

doi:10.1016/j.jbiomech.2011.11.002

Journal of Biomechanics
Volume 45, Issue 3 , Pages 569-578, 2 February 2012