Preclinical cost analysis of orthopaedic implants: a custom versus standard cementless femoral component for revision total hip arthroplasty

References 

1. Bobyn JD, Pilliar RM, Binnington AG, Szivek JA. The effect of proximally and fully porous coated canine hip stem design on bone modeling. Journal of Orthopaedic Research. 1987;5:393–408
2. Carter DR, Hayes WC. The behavior of bone as a two-phase porous structure. Journal of Bone and Joint Surgery [American]. 1977;59:954–962
3. Cauley, J.A., 1994. Epidemiology of THR. In: NIH Consensus Development Conference on Total Hip Replacement. Bethesda, MD.
4. Chafetz N, Baumrind S, Murray WR, Genant HK, Korn EL. Subsidence of the femoral prosthesis. A stereophotogrammetric evaluation. Clinical Orthopaedics. 1985;201:60–67
5. Chang RW, Pellissier JM, Hazen GB. A cost-effectiveness analysis of total hip arthroplasty for osteoarthritis of the hip. JAMA. 1996;275:858–865
   • MEDLINE
6. Engh CA, Bobyn JD. Biological fixation in total hip arthroplasty. Biological Fixation in Total Hip Arthroplasty. NJ: Slack, Inc; 1985;
7. Figgie MP. The role of customization in total hip arthroplasty. Current Opinion in Orthopaedics. 1993;4:38–42
8. Figgie, M.P., Burstein, A.H., 1990. Design rationale in custom fit total hip arthroplasty. In: Third Annual Symposium on Custom-Made Prostheses. Nice, France.
9. Franzen H, Mjoberg B, Onnerfalt R. Early loosening of femoral components after cemented revision. A Roentgen steriophotogrammetric study. Journal of Bone and Joint Surgery [British]. 1992;74:721–724
10. Freeman MAR, Tennant R. The scientific basis of cement versus cementless fixation. Clinical Orthopaedics. 1992;276:19–25
11. Huiskes R, van Rietbergen B. Preclinical testing of total hip stems. The effects of coating placement. Clinical Orthopaedics. 1995;319:64–76
12. Karrholm J, Borssen B, Lowenhielm G, Snorrason F. Does early micromotion of femoral stem prostheses matter? 4–7 year stereoradiographic follow-up of 84 cemented prostheses. Journal of Bone and Joint Surgery [British]. 1994;76:912–917
13. Kavanagh BF, Fitzgerald RH. Multiple revisions for failed total hip arthroplasty not associated with infection. Journal of Bone and Joint Surgery [American]. 1987;69:1144–1149
14. Keaveny TM, Bartel DL. Effects of porous coating, with and without collar support, on early relative motion for a cementless hip prosthesis. Journal of Biomechanics. 1993;26:1355–1368
    • MEDLINE
    • CrossRef
15. Kershaw CJ, Atkins RM, Dodd CA, Bulstrode CJ. Revision total hip arthroplasty for aseptic failure. A review of 276 cases. Journal of Bone and Joint Surgery [British]. 1991;73:564–568
16. Konieczynski, D.D., 1994. A finite element study of the mechanical performance of noncemented hip implants during the immediate post-operative term. Ph.D. thesis, Cornell University, Ithaca, NY.
17. Kotzar GM, Davy DT, Berilla J, Goldberg VM. Torsional loads in the early postoperative period following total hip replacement. Journal of Orthopaedics Research. 1995;13:945–955
18. Kuiper, J.H., 1993. Numerical optimization of artificial hip joint designs. Ph.D. thesis, University of Nijmegen, Nijmegen, Netherlands.
19. Mjoberg B, Hansson LI, Selvik G. Instability of total hip prostheses at rotational stress. Acta Orthopaedica Scandinavica. 1984;55:504–506
    • MEDLINE
20. Nistor L, Blaha JD, Kjellstrom U, Selvik G. In vivo measurements of relative motion between an uncemented femoral total hip component and the femur by Roentgen stereophotogrammetric analysis. Clinical Orthopaedics. 1991;269:220–227
21. Onsten I, Sanzen L, Carlsson A, Besjakov J. Migration of uncemented, long-stem femoral components in revision hip arthroplasty. A 2–8 year clinical follow-up of 45 cases and radiostereometric analysis of 13 cases. Acta Orthopaedica Scandinavica. 1995;66:220–224
    • MEDLINE
22. Paul, J.P., 1967. Forces at the Human Hip. Ph.D. Thesis, University of Glasgow, Glasgow, Scotland.
23. Phadke MS. Quality engineering using robust design. Quality Engineering Using Robust Design. Englewood cliffs, NJ: Prentice-Hall; 1989;
24. Reilly DT, Burstein AH. The mechanical properties of cortical bone. Journal of Bone and Joint Surgery [American]. 1974;56:1001–1022
25. Retpen JB, Varmarken JE, Rock ND, Jensen JS. Unsatisfactory results after repeated revision of hip arthroplasty. 61 cases followed for 5 (1–10) years. Acta Orthopaedica Scandinavica. 1992;63:120–127
    • MEDLINE
26. Rorabeck, C.H., 1994. Cost-benefit assessment of THR. In: NIH Consensus Development Conference on Total Hip Replacement. Bethesda, MD.
27. Rubin PJ, Rakotomanana RL, Leyvraz PF, Zysset PK, Curnier A, Heegaard JH. Frictional interface micromotions and anisotropic stress distribution in a femoral total hip component. Journal of Biomechanics. 1993;26:725–739
    • MEDLINE
    • CrossRef
28. Ruegsegger P, Dambacher MA, Ruegsegger E, Fischer JA, Anliker M. Bone loss in premenopausal and post menopausal women. A cross-sectional and longitudinal study using quantitative computed tomography. Journal of Bone and Joint Surgery [American]. 1984;66:1015–1023
29. Shirazi-Adl A, Dammak M, Paiement G. Experimental determination of friction characteristics at the trabecular bone/porous-coated metal interface in cementless implants. Journal of Biomedical Material Research. 1993;27:167–175
    • MEDLINE
    • CrossRef
30. Sledge, C.B., 1994. Total hip replacement: 12 years later — what has changed? In: NIH Consensus Development Conference on Total Hip Replacement. Bethesda, MD.
31. Soballe K, Toksvig-Larsen S, Gelineck J, Fruensgaar DS, Hansen ES, Ryd L, et al. Migration of hydroxyapatite coated femoral prostheses. A Roentgen Stereophotogrammetric study. Journal of Bone and Joint Surgery [British]. 1993;75:681–687
32. Sugiyama H, Whiteside LA, Engh CA. Torsional fixation of the femoral component in total hip arthroplasty. Clinical Orthopaedics. 1992;275:187–193
33. In:  Taguchi G,  Ragsdell KM editor. Taguchi on Robust Technology Development. Bringing Quality Engineering Upstream. New York: ASME Press; 1993;